Output torque：16 N.m/25 N.m/40 N.m
ON/OFF control signal : 2 wire control
Modulating control signal : 0-10v
Ambient conditions ：-10...+55℃, 0...90% RH
Output angle ：90° (95° Max)
The actuator is suitable for circular spindle n10 -18mm, or square spindle size 8 -14mm,length>40mm, and the rotation direction can be reversed by pushing the CCW/CW switchside of the case. To change the input/output signal valve, open the case, and find the JPplug on the PCB. The control signal valve can be changed by connecting the plug, torquecould be 16N.m, 25N.m and40 N.m.
| Model code | AK200-D... | AK24-A... (proportional control) | AK24-D.. (3-point control) |
| Output torque | 16 N.m, 25 N.m, 40 N.m | ||
| AC 230V | AC/DC 24V | ||
| Run time | 50...150s | 60...150s | |
| Operating power | 6VA,3W | ||
| Standstill power | 1...2.5 VA | ||
| Output angle | 90°( 95°Max ) | ||
| ON/OFF control signal | 2 wires control | ||
| Modulating control signal 1 | DC 0(2)...10V ( 100K ohm ) | ||
| Modulating control signal 1 | DC 0(4)...20mA ( 500K ohm ) | ||
| Modulating feedback signal | DC 0(2)...10V | ||
| Protection rank | IP54 | ||
| Ambient conditions | -10...+55℃ 0...90% RH | ||
| Noise max | 40 dB(A) | ||
| Weight | 1.5...2kg | ||
