Standstill power：12VA,3W / 5VA,3W
Output torque：4 N.m/6 N.m/10 N.m
Ambient conditions ：-10...+55℃, 0...90% RH
Output angle ：90° (95° Max)
Noise max ：40dB(A)
The actuator is suitable for circular spindle with 10 -18mm, or square spindle size6 -12mm, length>40mm, and the rotation direction can be reversed by pushing theCCW/CW switch side of the case. To change the input/output signal valve, openthe case, and find the JP plug on the PCB. The control signal valve can be changedby connecting the plug. Torque could be 4, 6 or 10 N.m.
| Model code | AK200-D... | AK24-A... (proportional control) | AK24-D.. (3-point control) |
| Output torque | 4 N.m, 6 N.m, 100 N.m | ||
| AC 230V | AC/DC 24V | ||
| Run time | 30...150s | 30...120s | |
| Operating power | 12VA,3W | 5VA,3W | |
| Standstill power | 12VA,3W | 5VA,3W | |
| Output angle | 90°( 95°Max ) | ||
| ON/OFF control signal | 2 wires control | ||
| Modulating control signal 1 | DC 0(2)...10V ( 100K ohm ) | ||
| Modulating control signal 1 | DC 0(4)...20mA ( 500K ohm ) | ||
| Modulating feedback signal | DC 0(2)...10V | ||
| Protection rank | IP54 | ||
| Ambient conditions | -10...+55℃ 0...90% RH | ||
| Noise max | 40 dB(A) | ||
| Weight | 600...900g | ||
